| ||
|
Description |
Part Number |
MSRP |
|
WarP 7 ™ - Double ended shaft - neutrally timed, pre-drilled for advanced timing, 1.125" CE Shaft, 1.125" DE Shaft |
00-08217 |
$1,475.00 |
|
ADC 8 - Single ended shaft - no advance timing, 1.125" DE Shaft |
203-06-4001 |
$1,500.00 |
|
ADC 8 - Double ended shaft - no advance timing, .750" CE Shaft, 1.125" DE Shaft |
203-06-4001A |
$1,550.00 |
|
ImPulse 8 ™ - Double ended shaft - no advance timing, .750" CE Shaft, 1.125" DE Shaft |
203-06-4001R |
$1,575.00 |
|
WarP 8 ™ - Double ended shaft - Advance timing, .875" CE Shaft, 1.125" DE Shaft |
00-08218 |
$1,650.00 |
|
ImPulse 9 ™ - Double ended shaft - advanced timing, 1.125" DE Shaft, .750" CE Shaft |
00-08259 |
$1,675.00 |
|
ImPulse 9 ™ - Single ended shaft - advanced timing, 1.125" DE Shaft |
00-08269 |
$1,675.00 |
|
ImPulse 9 ™ - Double ended shaft - advanced timing, 1.125" DE Shaft, .875" CE Shaft, WarP 9 style mounting holes |
00-08249 |
$1,775.00 |
|
WarP 9 ™ - Double ended shaft - advanced timing, .875" CE Shaft, 1.125" DE Shaft |
00-08219 |
$1,875.00 |
|
WarP 11 ™ - Double ended shaft - advanced timing, .875" CE Shaft, 1.125" DE Shaft |
00-08311 |
$3,025.00 |
|
WarP 11HV ™ - Interpoled, high-voltage, double ended shaft - no advance timing, .875" CE Shaft, 1.125" DE Shaft |
00-08911 |
$3,575.00 |
|
TransWarP 7 ™ - Double ended shaft - advanced timing, 1.125" CE Shaft, 1.370", 32-tooth spline, double DE bearings |
00-08207 |
$2,175.00 |
|
TransWarP 9 ™ - Double ended shaft - advanced timing, 1.125" CE Shaft, 1.370", 32-tooth spline, double DE bearings |
00-08309 |
$2,275.00 |
|
TransWarP 11 ™ - Double ended shaft - advanced timing, 1.125" CE Shaft, 1.370", 32-tooth spline, double DE bearings |
00-08711 |
$3,350.00 |
|
WarP 13 ™ - Double ended shaft - fan, advanced timing, 32 tooth spline, hardened shaft |
00-08513 |
$5,075.00* |
|
WarP 13 ™ - Double ended shaft – fan, advanced timing, 10-spline, hardened shaft |
00-08413 |
$5,075.00* |
|
Slip Yoke - Slip-yoke assembly for use with all TransWarP ™ Motors |
1350SYA |
$250.00 |
|
Cover Band - Forced air cover band for all 9.25” NetGain Motors, single 1.88” air inlet between terminal studs |
10808219EE |
$65.00 |
|
Shaft Housing - Turbo 400 style "shorty" tail shaft housing for use with all TransWarP ™ Motors - also requires Slip Yoke assembly |
T400STS |
$225.00 |
|
EMIS ™ - Engine Motor Interface System - Interfaces ICE to Alltrax electric motor controllers (only!) |
EMIS |
$675.00 |
|
TIM ™ - Technician Interface Module - one required for programming EMIS ™ units |
TIM |
$675.00 |
|
DualPro 36 - DualPro industrial battery charger, 36 Volt, 12 Amps (U.S.) |
Dual36US |
$325.00 |
|
DualPro 36 - DualPro industrial battery charger, 36 Volt, 24 Amps (U.K.) |
Dual36UK |
$550.00 |
|
DualPro 48 - DualPro industrial battery charger, 48 Volt, 9 Amps |
Dual48US |
$375.00 |
|
Alltrax 4834 - Alltrax Controller - Model AXE 4834, 48 Volts, 300 Amps |
AXE4834 |
$325.00 |
|
Alltrax 4844 - Alltrax Controller - Model AXE 4844, 48 Volts, 400 Amps |
AXE4844 |
$425.00 |
|
Alltrax 4845 - Alltrax Controller - Model AXE 4845, 48 Volts, 400 Amps - continuous |
AXE4845 |
$495.00 |
|
Alltrax 4855 - Alltrax Controller - Model AXE 4855, 48 Volts, 500 Amps |
AXE4855 |
$595.00 |
|
Alltrax 4865 - Alltrax Controller - Model AXE 4865, 48 Volts, 650 Amps |
AXE4865 |
$675.00 |
|
Alltrax 7234 - Alltrax Controller - Model AXE 7234, 72 Volts, 300 Amps |
AXE7234 |
$575.00 |
|
Alltrax 7245 - Alltrax Controller - Model AXE 7245, 72 Volts, 450 Amps |
AXE7245 |
$695.00 |
|
Change Motor Timing - Change any motor from advanced CCWDE to neutral or advanced CWDE timing |
Timing |
$100.00 |
|
Crate Motor - Use wooden crate rather than standard foam-fill packaging |
Crate |
$100.00 |
To request further information you may CLICK HERE, or to purchase a motor, please contact one of our Authorized Dealers or Authorized Distributors.
You may contact us directly via the following:
| NetGain Motors, Inc. |
| 800 South State Street, Suite 4 |
| Lockport, Illinois 60441 |
| Voice: 630-243-9100 |
| Fax: 630-685-4054 |
Problems with these web pages? Contact the person responsible for the problems!